Fennec is a build of Firefox’s source available through f droid. This allows installing Firefox without having to use the google play store.
Fennec comes with most, if not all, the features of Firefox. The F Droid page says " It’s focused on removing any proprietary bits found in official Mozilla’s builds." I haven’t noticed any missing features though. You can add extensions like u block origin.
Speed seems on par with other browsers.
Deja Vu stores the locations of wifi APs and cell towers on your phone. This allows for greater accuracy than using gps alone and allows you to do it without pinging google may times a day like stock android phones with location services turned on do.
This app requires MicroG’s UnifiedNlp to work which requires a ROM with signature spoofing enabled. The easiest way to get this is to use a custom ROM like Lineage with Microg or use NanoDroid with a custom ROM.
Important app for retaining functionality while degoogling your android phone.
This small restaurant in Paris’ 20th arrondissement is not exactly at a tourist hotspot – which is probably what adds to its charm. The restaurant is lovingly decorated in a vintage 60s/70s style and you really feel like you are sitting in a friends’ living room. A friend with a somewhat eccentric taste, that is, but blessed with amazing cooking skills.
We had a very, very nice dinner at Chez Elle, with wonderful French cuisine at a very fair price (the full menu is 13.50 EUR), and will definitely come here again on our next stay in Paris. It is well worth the metro trip up to Télégraphe station!
Printer showed up without critical parts so I had to wait another week for parts to arrive. The assembly guide is online only and is mediocre. I often found myself putting something together then having taking if off and putting it on correctly the second time. They forgot to mention certain parts like the bltouch connector holder. Most of the parts are labeled or obvious but many you have to compare against assembly instructions to figure it out. The printer is not designed for easy assembly. You will have to the frame together and continue working around tightening, loosening, adjusting until you get it square. I also had a lot of issues aligning the lead screws so that I had to remove the x gantry and run the lead screw nuts up and down while adjusting. The instructions had fan mounts for a different fan type so I had to go to the discord to get the proper ones that weren’t exactly right, had to stack 2 for clearance to carriage. The wiring is laid out with 2 pictures of a good looking layout and no detailed instructions. A 3D PDF model is available but not really useful as small parts are missing and it’s hard to manage all the assemblies so you can see what you want. There is support through Discord that typically has 1 or 2 of the main guys that can be very helpful and they are available a lot.
They suggest MatterControl for host/slicing. MatterControl has unfixed bugs on Linux that made it unusable for me. I’ve been using PrintRun for host software and Slic3r PE for slicing which have been working fine.
Design is simplistic and leaves options open for upgrading over time. The frame is rock solid. Control is through a RAMBO 1.3 board with configured Marlin 1.1 supplied. Motors are sized properly to move the heavy axes. The details is where everything goes downhill. The x idler mount is poorly designed and has come loose several times leading to failed prints and failed homing that nearly took out the bed. Bed mounting is not solid, making it an absolute chore to get it level and keep it level. The bltouch mount is not solid as assembled according to the instructions so it will be wildly inconsistent until you properly secure it. The extruder is simple, stiff and is designed to allow a second extruder to fit on the x carriage. The extruder is a liability because the drive gear is off by about 2.5mm from hole in the heatsink meaning the filament is forced sideways into heatsink leading to feed issues from the awkward angle and filament bending. The hotend is a e3d V6 and works great. The printer came with 2 40mm axial fans for print fans which are the absolute wrong choice. The printer needs directed cooling by the nozzle to print properly. The confusing part is that they used to provide blower fans and .stls for fan shrouds that worked fine and are what I ended up using.
I had tons of printing problems. The core issue is that they supplied axial fans and no base profile. The axial fans would not provide enough cooling or would cause thermal shutdowns by overpowering the bed or hotend heaters. I ended up having to buy blower fans from them and print fan shrouds from stls they provided. You’re supposed to print the fan mounts by somehow macgyvering the fans onto the axis using zipties so you can print the cable chain and fan mounts. The lack of wiring instructions lead to wires coming loose during printing causing further printer shutdowns.
Once everything is properly setup, you can get some really nice prints. The extrusion is very consistent and motion is rock solid.
Printer has a lot good components and upgradability, but the missteps on the small things make this more of a project than a printer.
La Hierba Luisa serves all vegan traditional starters, main courses and desserts. The tastes are good and expressive, if you want something outside of boring fast food. The food is not fast in literal sense either, if you are in a hurry. As you might expect the presentation is also quite good outside of the taste. We had only time to eat here twice, which is not nearly enough to go through the whole menu, there are always daily specials outside of the menu of about 10 main courses and 10 starters and desserts.
You can get good service in English here and the menu has English descriptions.
Bioloco serves several delicious hamburgers and salads and a few typical side dishes like french fries and fried onions. The hamburgers are very good, but lack a bit in variety. I tried only a couple of the salads and they were good as well.
Outside of main courses you can get smoothies, coffee and several dessert options. There was also a small selection of local Drago craft beers.
If you get a hamburger and a side dish, you won’t stay hungry, especially the dessert portions are huge even, when sharing.
The restaurant has English menus and you can get good service in English.
The karaage (fried tofu) tastes amazing, and the sauces are perfect. The food also came extremely fast. The staff (2 people) started to have some problems when the place became more crowded, but everything else about this place, including the ambiance, totally makes up for it.
This free review service looks very promissing, but apparently it lacks an API (application programming interface). So other services have to invent the wheel again and implement their own review system, which is a bit sad. 🤷
Back in 1977, Powers of Ten awed many children and adults alike with a presentation of our scientific understanding of the universe at different orders of magnitude, zooming out from a couple on a picnic blanket to the observable universe, then zooming back in, all the way down to the level of the hypothesized activity inside a single proton. (You can view the 9 minute film on YouTube.)
Astronomer Caleb Scharf’s book The Zoomable Universe updates this approach to our current understanding of the universe, aided by modernized visuals created by illustrator Ron Miller and a graphic design firm.
The book doesn’t start the journey on a picnic blanket, but at an order of magnitude of 10^27 meters—the “diameter of the cosmic horizon”—and ends at 10^-35 meters, the Plack length. At each order of magnitude, Scharf attempts to bring out astonishing facts, while narrating the journey in a conversational style.
Full-page photographs, computer renderings and information graphics support each section of the book. Their quality and aesthetic style are somewhat inconsistent throughout the book, ranging from pretty basic computer renderings of imaginary planets to detailed and striking illustrations like the one below.
Illustration of the different forces at work on planet Earth. (Credit: Caleb Scharf / Ron Miller / SW Infographics. Fair use.)
Scharf’s text is informative, but it’s in the nature of a book like this to provide limited depth on any one topic. The objective here is to create a sense of wonder, and a high level understanding of how the universe operates at different scales. In that sense, the book functions as a kind of paper planetarium.
To Scharf’s credit, he does not shy away from attempting to explain the weird and wonderful world of the subatomic, and the book’s illustration of the famous double-slit experiment and the different interpretations of its results is especially lucid.
The book concludes with a notes section that is very much worth reading, giving additional background on the thinking that went into each section, and pointing to books, papers and websites for further exploration. I give the author high marks for this approach: notes don’t have to be boring!
While I found much of the material in The Zoomable Universe quite familiar, I still appreciated its thoughtful organization and the engaging presentation. I would recommend the book especially for younger readers, or those seeking to re-engage with astronomy, physics and biology (perhaps after a less than stellar experience learning about those subjects in school).
I’ll be honest with you: I rarely enjoy poetry; for the most part, it creates in me only the “feeling that I should be feeling something”. It’s a different story when poetry is set to song or to beautiful illustrations. Perhaps other readers create their own mental melodies when they read mere words; I require the assist.
With The Lost Words, Robert Macfarlane and Jackie Morris have created something even I can appreciate: a book that, through poetry and gorgeous art, invites a profound re-connection with nature.
The premise of the book is that words that refer to the natural world—words like “adder”, “conker”, “otter” and “wren”—are slowly disappearing from the language of children. And surely for many children growing up today, especially in urban environments, this is very true.
To restore these words—and the connection with nature they represent—to our lives, the book invites us to summon nature by reading out acrostic spells. Each poem is set alongside a beautiful full-page illustration showing the subject (e.g., a dandelion plant) in isolation; turn the page, and you’ll discover a two-page watercolor showing the subject again, now within nature. The spell for “bramble” begins as follows:
Bramble is on the march again,
Rolling and arching along the hedges
into parks on the city edges
All streets are suddenly thick with briar:
cars snarled fast, business over.
Moths have come in their millions,
drawn to the thorns. The air flutters.
This spell is then followed by an immersive illustration, making the most of the book’s large (27.7 cm x 37.6 cm) format:
Illustration of bramble, from The Lost Words. (Credit: Jackie Morris. Fair use.)
The Lost Words is not a science book; it does not provide explanation or context. In the beauty of its spells and illustrations, it builds something arguably even more important: the emotional foundation for our interest in nature. We will fail to conserve what we do not care about.
There is no doubt that Morris and Macfarlane have created a masterpiece, a timeless work that can be enjoyed by all ages. It is a book of few words, and it invites meditative reflection more than reading. I expect to pick it up again when it’s too cold and rainy outside to take a walk, but I still long to kindle my memory of the beauty of the natural world.